Wooden Boat Antifouling 814 is an antifouling coating. Suitable for the bottoms of wooden sea-going vessels to prevent marine fouling organisms, shipworms and wood-boring insects from damaging the wood and fouling the bottom. A colour-changing wooden boat antifouling coating based on chlorinated rubber, cuprous oxide and various organic antifouling agents, free of organotin antifouling agents. Effectively prevents wood rot and damage by shipworms and wood-boring insects; improves the operating rate of fishing vessels, reduces repair costs and extends the service life of wooden boats. After contact with seawater, the film gradually changes from red to grey-green, close to the colour of seawater, and does not scare away fish schools. Parameters on this page: volume solids 55 ± 3%, dry film thickness 40 µm, theoretical spreading rate 121 g/m².
Parameter source: KAILIN original technical data sheet (TDS) "Wooden Boat Antifouling (Tin-free) 814"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 55 ± 3% |
|---|---|
| Dry Film Thickness | 40µm |
| Theoretical Spreading Rate | 121 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 25°C |
| Thinner | Thinner 101 |
| Colour / Appearance | Iron red; turns grey-green after contact with seawater |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
A tin-free antifouling based on chlorinated rubber, cuprous oxide and various organic antifouling agents
colour-changing wooden boat antifouling coating.
Effectively prevents wood rot and damage by shipworms and wood-boring insects
Improves the operating rate of fishing vessels, reduces repair costs and extends the service life of wooden boats
After contact with seawater, the film gradually changes from red to grey-green, close to the colour of seawater, and does not scare away fish schools
Suitable for the bottoms of wooden sea-going vessels to prevent marine fouling organisms, shipworms and wood-boring insects from damaging the wood
and fouling the bottom.
| Appearance | Iron red; turns grey-green after contact with seawater. |
|---|
| Volume Solids | 55 ± 3% (measured according to GB/T 9272 eqv ISO 3233:1998) |
|---|---|
| Dry Film Thickness | 40µm |
| Wet Film Thickness | 73µm |
| Theoretical quantity | 121g/m² |
| Flash Point | 25°C |
| Drying Time | ||||
| Temperature | 5°C | 20°C | 30°C | |
| Table | Dry ≤ | 4h | 2h | 1h |
| Practical | Dry ≤ | 36h | 24h | 12h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 24h | 20h | 10h |
| Maximum | 5d | 2d | |
| Recommended number of coats | 2 coats, preferably at a dry film thickness above 80 µm. |
|---|
Can be applied directly to wooden boat bottoms caulked with tung oil, lime and hemp; alternatively, 616 chlorinated rubber
iron oxide high-build anticorrosive coating may be used, followed by 814 wooden boat antifouling.
For new vessels, fill seams and holes with putty and oakum first, and after drying apply two coats of wood antifouling
For old vessel bottoms with attached marine growth and largely damaged bottom paint, remove the marine growth
Remove marine growth and loose old film; after washing with fresh water, fill seams and holes with putty and oakum, and after drying apply the wood antifouling
If the hull bottom cannot be dried in time, accelerate drying by fire
| Air Spray | |
| Thinner | Thinner 101 |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.5 MPa (approx. 3–5 kg/cm²) |
| Brush/roller | Thinner 101; thinning quantity 0–3% (by paint weight) |
|---|---|
| Cleaning solvent | Thinner 101 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 20 L drum 28 kg; 10 L drum 15 kg |
| Shelf Life | 12 months |
| Launching interval for antifouling | |||
| Temperature | 5°C | 20 | 30 |
| Minimum launching time | 24h | 20h | 10h |
| Maximum launching time | 5d | 2d | |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
|---|
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
