Chlorinated Rubber Iron Oxide Red High-build Anticorrosive Paint 616 is a chlorinated rubber paint used as a primer. Suitable for ship bottom anti-corrosion, ship waterline, offshore steel structures and other steel structures for corrosion protection. An anti-corrosive paint composed of chlorinated rubber, iron oxide red and other anti-corrosive pigments, plasticisers, additives and solvents. For maintenance recoating over old chlorinated rubber paint films, firmly adhering old paint films need not be removed, facilitating maintenance; the film does not saponify in seawater and has good compatibility with cathodic protection. Parameters on this page: volume solids 42 ± 3%, dry film thickness 75 µm, theoretical spreading rate 236 g/m².
Parameter source: KAILIN original technical data sheet (TDS) Chlorinated Rubber Iron Oxide Red High-build Anticorrosive Paint 616; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 42 ± 3% |
|---|---|
| Dry Film Thickness | 75µm |
| Theoretical Spreading Rate | 236 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 31°C |
| Thinner | Thinner 101 |
| Colour / Appearance | Iron red |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Composition | An anti-corrosive paint composed of chlorinated rubber, iron oxide red and other anti-corrosive pigments, plasticisers, additives and solvents. |
|---|
Low permeability of the film to water vapour and oxygen, with high water resistance and good corrosion protection
Excellent low-temperature application properties; may be applied at -20 °C to 50 °C
The paint film layers fuse into one another, providing excellent intercoat adhesion. On old chlorinated rubber paint
When recoating for maintenance, the firmly adhered old film need not be removed, making maintenance convenient
The film does not saponify in seawater and has good compatibility with cathodic protection.
| Use | Suitable for anticorrosion of hull bottoms, waterlines, offshore steel structures and other steel structures. |
|---|---|
| Appearance | Iron red |
| Volume Solids | 42 ± 3% (determined according to GB/T9272 eqv ISO3233:1998) |
|---|---|
| Dry Film Thickness | 75µm |
| Wet Film Thickness | 179µm |
| Theoretical quantity | 236g/m² |
| Flash Point | 31°C |
| Drying Time | |||
| Temperature | 5°C | 20°C | 30°C |
| Surface Dry | 4h | 2h | 1h |
| Hard dry | 24h | 12h | 8h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 12h | 8h | 6h |
| Maximum | Unlimited | ||
| Recommended number of coats | 2 coats, dry film thickness 150 µm. When 615-1 and 615-2 aluminium powder chlorinated rubber anti-corrosive paint are used as anti-corrosive paint, the total dry film thickness shall be not less than 240 µm. |
|---|
615-1, 615-2 aluminium powder chlorinated rubber anti-corrosive paint, or 546 epoxy tar ultra-high-build anti-corrosive paint,
846 epoxy tar high-build anti-corrosive paint.
| Subsequent coat | Various colour chlorinated rubber topcoats, 833 tin-free self-polishing antifouling paint, 839 long-life high-build antifouling paint. |
|---|
| Airless Spray | |
| Thinner | Thinner 101 |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.4-0.5mm |
| Spray output pressure | 15–20 MPa (approx. 150–200 kg/cm²) |
| Air Spray | |
| Thinner | Thinner 101 |
| Thinning quantity | 0–10% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.4 MPa (approx. 3–4 kg/cm²) |
One coat cannot achieve the recommended dry film thickness
| Thinner | Thinner 101 |
|---|---|
| Thinning quantity | 0–3% (by paint weight) |
| Cleaning solvent | Thinner 101 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 20 L drum, 26 kg |
| Shelf Life | 12 months |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
