Aluminium Chlorinated Rubber Anticorrosive Paint 615 is a chlorinated rubber paint used as a primer. Suitable for anticorrosion of ship bottoms, ship waterlines, offshore steel structures and buildings, and other steel structures. An anticorrosive paint composed of chlorinated rubber, plasticizers, anticorrosive pigments such as aluminium powder, additives and solvents. When recoating for maintenance over old chlorinated rubber films, firmly adhering old paint need not be removed, facilitating maintenance. The film does not saponify in seawater and has good compatibility with cathodic protection. Parameters on this page: volume solids 42 ± 3%, theoretical spreading rate 193 g/m².
Parameter source: KAILIN original technical data sheet (TDS) "Aluminium Chlorinated Rubber Anticorrosive Paint 615"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 42 ± 3% |
|---|---|
| Dry Film Thickness | 60 |
| Theoretical Spreading Rate | 193 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 31 |
| Thinner | Thinner 101 |
| Colour / Appearance | 615-1 silver-white, 615-2 light aluminium red |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Composition | Anti-corrosive paint composed of chlorinated rubber, plasticizers, anti-corrosive pigments such as aluminium powder, additives and solvents. |
|---|
Low permeability of the film to water vapour and oxygen, with high water resistance and good corrosion protection
Excellent low-temperature application properties; may be applied at -20 °C to 50 °C
The paint film layers fuse into one another, providing excellent intercoat adhesion. On old chlorinated rubber
When repainting for maintenance on the film, it is not necessary to remove firmly adhering old paint; maintenance is convenient.
The paint film does not saponify in seawater and is highly compatible with cathodic protection.
| Use | Suitable for anticorrosion of hull bottoms, waterlines, offshore steel structures and other steel structures. |
|---|---|
| Appearance | 615-1 silver-white, 615-2 light aluminium red |
| Product Name Volume Solids | Product Name % * | 615-1 42±3 | 615-2 42±3 |
| Dry Film Thickness | µm | 60 | |
| Wet Film Thickness | µm | 143 | |
| Theoretical quantity | g/m² | 193 | |
| Flash Point | °C | 31 |
* Determined in accordance with GB/T9272 eqv ISO3233:1998)
| Drying Time | |||
| Temperature | 5°C | 20°C | 30°C |
| Surface Dry | 4h | 2h | 1h |
| Hard dry | 24h | 12h | 8h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 12h | 8h | 6h |
| Maximum | Unlimited | ||
| Recommended number of coats | 2 coats, dry film thickness greater than 120 µm |
|---|
702 Epoxy Zinc-rich Shop Primer or 703 Epoxy Iron Oxide Shop Primer, 704 Inorganic Zinc Silicate Shop
Primer, or applied directly to steel surfaces meeting the surface preparation quality requirements.
| Subsequent coat | 616 Chlorinated Rubber Iron Oxide High-build Anti-corrosive Paint, or chlorinated rubber topcoat in various colours. |
|---|
Steel free from mill scale: grind with elastic grinding discs to St3 or blast to Sa2.5.
Shop-primed steel: secondary surface preparation at damaged and rusted areas, grind with elastic grinding discs to St3.
Welds, flame-cut or flame-straightened damaged areas: grind with elastic grinding discs to St3.
| Airless Spray | |
| Thinner | Thinner 101 |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.4-0.5mm |
| Spray output pressure | 15–20 MPa (approx. 150–200 kg/cm²) |
| Air Spray | |
| Thinner | Thinner 101 |
| Thinning quantity | 0–10% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.4 MPa (approx. 3–4 kg/cm²) |
One coat cannot achieve the recommended dry film thickness
| Thinner | Thinner 101 |
|---|---|
| Thinning quantity | 0–3% (by paint weight) |
| Cleaning solvent | Thinner 101 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 20 L drum, 24 kg |
| Shelf Life | 12 months |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
| The company reserves the right to make modifications | based on continuous product improvement. |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
