Safeguard FRC PE II Two-Component Tin-Free Elastomeric Silicone Tie Coat is an intermediate coat. Specifically designed as a tie coat for SeaQuest Endura II and SeaQuest Endura II (EC) topcoats, ensuring a relatively long recoating interval and providing application flexibility. It provides excellent adhesion for SeaQuest Endura II and SeaQuest Endura II (EC) topcoats. Parameters on this page: volume solids 55 ± 2%, dry film thickness 90-90 µm, theoretical spreading rate 6.1-6.1 m²/L.
Parameter source: JOTUN original technical data sheet (TDS) for Safeguard FRC PE II Two-Component Tin-Free Elastomeric Silicone Tie Coat; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 55 ± 2% |
|---|---|
| Dry Film Thickness | 90-90 µm |
| Theoretical Spreading Rate | 6.1-6.1 m²/L |
| VOC | 380 g/L (China) |
| Density / Specific Gravity | 1 kg/L |
| Number of Components | Two-component |
| Flash Point | 24 °C |
| Mixing Ratio | 16.7 parts : 1.7 parts (by volume) |
| Shelf life | 18 months : 24 months |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Safeguard FRC PE II
It is a two-component tin-free elastomeric silicone tie coat. It provides excellent adhesion for SeaQuest Endura II and SeaQuest Endura II (EC) topcoats. It can be applied directly only over the following primer surfaces: Jotacote Universal N10 general-purpose abrasion-resistant epoxy N10 (0B9)
Jotaprime 500 Alu / Alu RT Epoxy Primer 500 Aluminium/Aluminium Red (0AZ)
For the complete drydock application procedure for JOTUN silicone foul-release coatings, refer to TSS-TI-084
Marine coatings:
Recommended for underwater hulls during dry-docking and newbuilding. Specifically designed as a tie coat for SeaQuest Endura II and SeaQuest Endura II (EC) topcoats, ensuring a relatively long recoating interval and providing application flexibility.
Others
Light red
| Property | Test / Standard | Description |
| Volume Solids | ISO 3233 | 55± 2 % |
| Flash Point | ISO 3679 Method 1 | 24 °C |
| Density | Theoretical Value | 1 kg/L |
| Region | Regulations | Test / Standard | VOC Value |
| US | CARB(SCM)2020 / SCAQMD rule 1113 | Calculation | 353 g/L |
| Hong Kong | Air Pollution Control (VOC) Regulation | Calculation | 353 g/L |
| EU | European Paint Directive 2004/42/CE | Calculation | 353 g/L |
| China | GB 30981-2020 Limit of harmful substances of industrial protective coatings | GB/T 23985-2009 8.3 | 380 g/L |
The data listed are based on factory batch production and may vary slightly with colour.
Typical recommended specification range
| Dry Film Thickness | 90-90 µm |
| Wet Film Thickness | 160-160 µm |
| Theoretical Spreading Rate | 6.1-6.1 m²/L |
Surface Preparation
| Substrate | Minimum | Recommended |
| Coated surface | A clean, dry and sound compatible primer. | |
This product may be applied by the following methods
| Spray | Apply by airless spray. |
|---|
| Safeguard FRC PE II Comp A — Silicone Low-Surface-Energy Tie-Coat PE II, Component A | 16.7 parts |
| Safeguard FRC PE II Comp B — Silicone Low-Surface-Energy Tie-Coat PE II, Component B | 1.7 parts |
Do not add thinner.
| Cleaner | Jotun Thinner No. 7 / Jotun Thinner No. 10 |
|---|
When the thinner is used as a cleaning solvent, it must first comply with local regulatory requirements
| Nozzle Tip Size (inch/1000) | 15-23 |
|---|---|
| Nozzle Pressure (Minimum) | 210 bar/3000 psi |
| Substrate Temperature | 0 °C | 5 °C | 10 °C | 23 °C | 30 °C | 40 °C |
| Touch Dry | 14 h | 10 h | 7 h | 4 h | 3 h | 2 h |
| Minimum recoat interval | 18 h | 12 h | 8 h | 6 h | 5 h | 4 h |
For the maximum recoat interval, refer to the Application Guide (AG) for this product.
The minimum substrate temperature during paint drying and curing is 0 °C.
Drying and curing times depend on controlled temperature and relative humidity (30–85%) and the product's average dry film thickness range.
If rain occurs within 2 h after applying the Safeguard FRC PE II tie coat, a fresh coat of Safeguard FRC PE II must be applied to restart the recoating interval.
If rainfall lasts more than 12 h, a fresh coat of Safeguard FRC PE II must always be reapplied.
If extremely high humidity or rainy weather occurs after applying the Safeguard FRC PE II tie coat, the curing process is expected to be extended and the minimum recoating interval increased.
Assess the coating surface accordingly.
| Note | The product may be slightly tacky during curing. |
|---|---|
| Touch Dry | The state at which light finger pressure leaves no mark or stickiness. |
Minimum recoat interval after drying: the recommended minimum interval before applying the next coat.
| Paint temperature | 10 °C | 23 °C | 30 °C | 40 °C |
| Pot Life | 1 h | 30 min |
| Induction Time | Not required |
|---|
When mixing and stirring, the recommended stirring temperature of the base and curing agent is above 18 °C.
May be applied directly only over the following primer: Jotacote Universal N10 Universal Abrasion-resistant Epoxy N10 (0B9)
The mechanical strength of silicone fouling release coatings is generally weaker than that of conventional self-polishing coatings; avoid mechanical abrasion after application.
| Volume | Container Size | |
| (L) | ||
| Safeguard FRC PE II Comp A — Silicone Low-Surface-Energy Tie-Coat PE II, Component A | 16.7 | 20 |
| Safeguard FRC PE II Comp B — Silicone Low-Surface-Energy Tie-Coat PE II, Component B | 1.7 / 0.85 | 3 / 1 |
When using the 1 L can of Component B, two cans are required to achieve the correct mixing ratio.
The packaging sizes above are typical reference sizes for factory batch production. Due to regional regulatory differences, packaging sizes and capacities may vary by region.
Store in accordance with national regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Safeguard FRC PE II Comp A — Silicone Low-Surface-Energy Tie-Coat PE II, Component A | 18 months |
| Safeguard FRC PE II Comp B — Silicone Low-Surface-Energy Tie-Coat PE II, Component B | 24 months |
In some markets, the stated shelf life may be shortened to comply with local legal requirements. The above is the minimum shelf life; thereafter, testing is required to confirm quality remains acceptable.
For professional use only. Applicators and workers must be trained, experienced, capable and equipped to mix, stir and apply the coating correctly in accordance with JOTUN's technical documents. Applicators and workers must wear appropriate personal protective equipment when using this product. This guidance is provided based on current product knowledge. Any proposed modification to suit site conditions must be approved by the responsible JOTUN representative before use.
Read the safety warnings on the container packaging. Use in well-ventilated conditions. Avoid inhaling spray mist and avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner, soap and water. In case of eye contact, rinse thoroughly with water and seek medical attention immediately.
When used primarily as a primer or antifouling coating, products may show slight colour variation from batch to batch. Such products, and epoxy products used as topcoats, may chalk when exposed to sunlight.
Gloss and colour retention of topcoats depend on the colour type, the surrounding environment such as temperature and UV intensity, application quality and product type. Contact your local JOTUN office for further information.
The information in this datasheet is based entirely on knowledge gained in our laboratory and in practice. JOTUN products are regarded as semi-finished products, and their use is generally beyond our control. JOTUN therefore guarantees only the quality of the product itself. To comply with local regulations, the product may be adjusted, and we reserve the right to modify the datasheet without further notice.
Users should consult JOTUN for specific guidance on the suitability of the product for their requirements and applications.
In case of any discrepancy between language versions, the English (UK) version shall prevail.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
