Jotun Accelerator WB PU is a water-borne coating. In the industrial protective coatings sector: recommended when faster curing is required or for low-temperature substrate application. An accelerator for water-borne polyurethane to achieve fast drying and fast curing. Parameters on this page: number of components: one. Comparable products from the same brand: Jotatop BC300 WF Water-borne Universal Polyurethane Blade Coating BC300, Hardtop Clear WF Water-borne Polyurethane Clear Varnish, Hardtop E99 WF HG Water-borne Polyurethane High-gloss Topcoat HG.
Source: JOTUN original technical data sheet (TDS) 'Jotun Accelerator WB PU'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | 60 g/L |
| Density / Specific Gravity | 1 kg/L |
| Number of Components | One-component |
| Flash Point | 101 °C |
Jotun Water-borne Polyurethane Accelerator (6V2)
An accelerator for water-borne polyurethane to achieve fast drying and fast curing. After mixing component A and component B, add no more than 1%.
Industrial protective coatings:
Recommended when faster curing is required or when coating at low substrate temperatures.
Others
Colourless to pale yellow.
| Property | Test / Standard | Description |
| Flash Point | ISO 3679 Method 1 | 101 °C |
| Density | Theoretical Value | 1 kg/L |
| VOC — EU | IED (2010/75/EU) (theoretical value) | 60 g/L |
The data listed are based on factory batch production and may vary slightly with colour.
One-component
| Substrate Temperature | 5 °C | 10 °C | 23 °C |
| Touch Dry | 45 min | 35 min | 30 min |
| Minimum recoat interval | 2.5 h | 2 h | 1.5 h |
| Abrade after drying/curing | 3.5 h | 2.5 h | 2 h |
For the maximum recoat interval, refer to the Application Guide (AG) for this product.
Data are based on Jotatop BC 300 WF and Jotatop BC 200 WF.
Data are based on the recommended addition rate of 0.6%.
Consult the Jotun representative for the use of other water-borne products.
| Touch Dry | The state at which light finger pressure leaves no mark or stickiness. |
|---|
Minimum recoat interval after drying: the recommended minimum interval before applying the next coat.
| Dry to sanding | When the coating has dried to a state that can be sanded without paint sticking to or clogging the sandpaper. |
|---|
| Weight | Container Size (L) | |
| Jotun Water-borne Polyurethane Accelerator | 0.45 kg | 0.5 |
The packaging sizes above are typical reference sizes for factory batch production. Due to regional regulatory differences, packaging sizes and capacities may vary by region.
Store in accordance with national regulations. Keep in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
Jotun Water-borne Polyurethane Accelerator, 48 months
In some markets, the stated shelf life may be shortened to comply with local legal requirements. The above is the minimum shelf life; thereafter, testing is required to confirm quality remains acceptable.
For professional use only. Applicators and workers must be trained, experienced, capable and equipped to mix, stir and apply the coating correctly in accordance with JOTUN's technical documents. Applicators and workers must wear appropriate personal protective equipment when using this product. This guidance is provided based on current product knowledge. Any proposed modification to suit site conditions must be approved by the responsible JOTUN representative before use.
Read the safety warnings on the container packaging. Use in well-ventilated conditions. Avoid inhaling spray mist and avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner, soap and water. In case of eye contact, rinse thoroughly with water and seek medical attention immediately.
When used primarily as a primer or antifouling coating, products may show slight colour variation from batch to batch. Such products, and epoxy products used as topcoats, may chalk when exposed to sunlight.
Gloss and colour retention of topcoats depend on the colour type, the surrounding environment such as temperature and UV intensity, application quality and product type. Contact your local JOTUN office for further information.
The information in this datasheet is based entirely on knowledge gained in our laboratory and in practice. JOTUN products are regarded as semi-finished products, and their use is generally beyond our control. JOTUN therefore guarantees only the quality of the product itself. To comply with local regulations, the product may be adjusted, and we reserve the right to modify the datasheet without further notice.
Users should consult JOTUN for specific guidance on the suitability of the product for their requirements and applications.
In case of any discrepancy between language versions, the English (UK) version shall prevail.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
