Hempel's Tool Cleaner 99610 is an auxiliary. It is used for cleaning brushes, paint rollers, spray equipment and other tools used for mixing or applying Hempadur products. Hempel's Tool Cleaner 99610 is a strong solvent mixture for cleaning tools used for mixing or applying two-component epoxy products. Parameters on this page: volume solids 0 ± 2%, number of components two-component. Comparable products from the same brand: Hempel's Mild Cleaner 99350, Hempel's Thinner 08570.
Parameter source: HEMPEL original technical data sheet (TDS) "Hempel's Tool Cleaner 99610"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 0 ± 2% |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | 709 g/L (China) |
| Density / Specific Gravity | 0.9 kg/L |
| Number of Components | Two-component |
| Flash Point | 28°C |
| Colour / Appearance | Clear 00000 |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
99610
Hempel's Tool Cleaner 99610 is a strong solvent mixture for cleaning the mixing and application tools used with two-component epoxy products. Compared with epoxy thinners, this product offers better cleaning performance. It does not contain chlorinated solvents.
For cleaning brushes, paint rollers, spray equipment and other tools used for mixing or applying Hempadur products. Do not use as a thinner for any paint.
| Product safety | Flash point 28 °C |
|---|
| Regulations | Value |
| European Union | 709 g/L |
| USA (coatings) | 709 g/L |
| USA (regulatory) | 709 g/L |
| China | 709 g/L |
This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 99610 |
|---|---|
| Standard colour / code | Clear 00000 |
| Volume solids | 0 ± 2% |
| density | 0.9 kg/L |
For further details, refer to the separate Hempel document Surface Preparation Guide.
(*For other application methods, consult the company representative.)
Drying and recoat
| Ambient temperature | 25°C |
|---|---|
| Product | 60 months |
99610
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
